 | 100 Watts output power in uninterrupted service:
 | This amplifier can work in uninterrupted full power service
(24 hours a day) with the greatest security. |
 | All the components have been over dimensioned according to the
most demanding requirements. |
|
 | Easily adjustable power output, by means of the variation
of the excitation power by a Decade, 1 Watt FM exciter, you can do
this setting by a control knob eternally accessible.
 | A meter placed on front panel permits to keep under
control the output power (forward and reflected), allowing in
this way the control of the regular working of both the
amplifier and the following stage (final amplifier or antenna). |
|
 | 87.5 to 108MHz operation band: no tuning or modification
are required for any frequency on the whole FM broadcast band.
 | This amplifier, when used in conjunction with a Decade FM
exciter like our FM-800 series (which are characterized be very
easy frequency programmatic), is very fit to be used as a stand
alone or back-up setup. |
|
 | No maintenance required. This equipment is totally solid
state, this means there are no parts requiring substitution, high
performances stability and no maintenance. |
 | Output broadband low pass filter: The output low pass
filter respects the current international recommendations about
output signal’s harmonic content. |
 | Electronic protections, that guard the power transistor
from damages that can be caused from accidental events like load
disjunction, ventilation system’s fault and input overdriving. |
 | Stabilized DC supply, permits the regular working of the
transistor, with a wide tolerance from main voltage variations, like
spikes. |
 | Meets or exceeds international standards for safety and
electrical specifications. |